Remove Faucet Without Basin Wrench

4 Best Methods to Remove Faucet Without Basin Wrench

Remove Faucet Without Basin Wrench

A large number of people prefer to dispose of their plumbing problems on their own rather than hiring a professional. There is no doubt that repairing and installing kitchen faucets can be tricky, especially if you do not have the right tools.

It is very important that we have at least one kitchen faucet in our kitchen due to the fact that it is flexible, convenient and very useful. With a good kitchen faucet, we are able to wash and take care of our kitchen effectively.

However, this great piece of equipment can cause a number of issues in the kitchen over time. Some of the problems that may occur are water leakage, low water pressure, rust, improper workmanship, etc.

As a result, there may come a time when we need to remove the faucet to deal with the problems that have arisen. In such a case, a basin wrench will make the job much easier.

Must Read:

How to Remove Faucet Handle Without Screws

How to Tighten Kitchen Faucet at Home in 6 Steps

How to Vent a Kitchen Sink under Window

Top 10 Best Pullout Kitchen Faucets in 2o21

What is Basin Wrench or Sink Wrench ?

Remove Faucet without basin wrench

An effective way to remove and install a faucet is to use a basin wrench, also called a sink wrench.

An asymmetric jaw and transverse handle are at one end of the long shaft. Both jaws are connected with a pivot pin on the shaft.

It is always best to remove a kitchen faucet with a basin wrench, but if you don’t have one, you don’t have to worry.
We will help you to remove faucet without basin wrench in this article.
It is a fact that basin wrenches are simple to use, inexpensive and can be used to accomplish a number of useful tasks.
If you know these steps to remove a kitchen faucet without a basin wrench, then it is possible to easily remove the faucet without using a basin wrench.

I will try to give you an in-depth explanation about how to remove faucet without  basin wrench in today’s tutorial.

Materials Required

Cleaning and repairing your kitchen faucet will require the right tools. You should prepare these tools in advance.

No additional tools are needed if your faucet is in need of replacement. Before you remove the kitchen faucet, make sure you have the new replacement ready.

  • Gauging Tape
  • Screw Driver
  • Socket Wrenches
  • Penetrating Oil
  • Adjustable Wrench or Channel-lock Pliers
  • Putty Knife
  • Towel or cloth
As soon as the items are arranged, let us begin.

How to Remove Faucet Without Basin Wrench

Step 1: Shut off the valves

The first thing we need to do is to shut down the valves.
It is recommended that you shut off both hot and cold valves if you have more than one.
The reason for doing this is to cut the water supply off, so you will not have to worry about your kitchen being flooded.
Remove Faucet Without Basin Wrench
I think the valves are located directly below the sink, so if you do not see them, then look the valves beneath the sink.
In general, most valves look like this, as you can see in the attached image.
If there is a possibility of unwanted water leaking from the sink, please place a bucket of a medium size below the sink. so that you can avoid any water drips.

Step 2: Open the Spigot

It is possible that some air pressure is still present inside the valve, even though there is no water flowing through it.
You may experience problems as a result of this leftover air pressure.

If the pressure bubble in your spigot does not disappear within a few minutes, open the spigot and let it free.

This step will make it easier to remove the faucet  after pressure has been released.

Step 3: Unplug Water Supply Lines to the Faucet

There was no difficulty following the previous steps, however, detaching the water lines may give you some difficulty.

Do not worry, we will guide you by making it as easy as possible.

It is recommended that you use the channel lock pliers in this case because you will have to detach the water line for the kitchen faucet.

You can attach your channel lock pliers securely to the kitchen’s water line by using your channel lock pliers.

Once attached, carefully remove the channel lock pliers. If you plan to keep the pliers attached to the waterline, you will need to handle them carefully.

You could potentially damage your kitchen’s faucet and water line if you are not cautious when performing this task.

Step 3: Unscrew and Remove the Mounting Nuts

How to remove kitchen faucet without a basin wrench

Due to the mineral content of water, and depending on how old your faucet is, it may be responsible for rusting the mounting nuts.

You should spray some penetrating oil or put grease on the mounting nuts and let it dry for a while. By doing so, the process will be smoothed out.

 

As a quick explanation, mounting nuts are used for attaching the faucet to the sink and are attached with bolts.

 

To remove the nuts, you will need to turn them counterclockwise.
When removing the nuts, you should be careful that you are not damaging the screws.
With the mounting nuts removed, the mounting can easily be removed (this process only applies to a newer model of kitchen faucet).
There might be a need for a basin wrench if your kitchen faucet is an older version (e.g. checkout the picture).
You will be able to remove the mounting nuts much more quickly with this tool.
The nuts can be unscrewed with any wrench or plier that will fit the nuts and are not necessarily needed in order to do so

Step 4: Take The Hose Off

In order for the kitchen faucet to be removed, you must first shut off the valves, disconnect the water lines, and remove the mounting nuts. You are almost ready to remove the kitchen faucet.

The kitchen faucet can now be safely removed from the sink and placed in a safe location. Afterwards, you can very easily clean each part of the faucet by removing them one by one.

The faucet can then be reinstalled to the sink and its mounting nuts, water lines, as well as its valves attached again after cleaning.

Remove it with a putty knife or plastic scraper if it sticks as you lift it. Clean the sink and its base with a cloth afterwards.

Remove all waste and debris from the faucet, then mix warm water with dish soap and use a soft, scrubbing pad or brush to clean it. Rust and mineral deposits can be removed with vinegar.

You’re done !!! Congrats.

How to Remove Kitchen Faucet with Basin Wrench

Conclusion

A basin wrench is often referred to as the best friend of the plumber, without them his life would be impossible. That doesn’t necessarily mean that it couldn’t be replaced by another tool.
The majority of problems you may encounter can be resolved by yourself with the limited tools available unless there are serious problems.
All of what I have discussed here must assist you to remove a kitchen faucet without the use of a basin wrench.
These methods are simple enough to make you motivated to handle the task on your own.

It is possible to use the same sink after removing the faucet, or you can install a new faucet after you have removed the old one. The decision is yours.

Let’s take a moment to try out the methods and share our experiences with each other. Do not forget to leave your opinions in the comments section below.

Similar Posts

Leave a Reply

Your email address will not be published.