How to Remove Faucet Handle Without Screws and With Screws

The valve cannot be repaired until the faucet handle is removed. That isn’t too difficult, but corrosion can cause the handle to stick if the faucet is old or located in an area with high humidity levels.

You can usually get it off with household supplies and tools without damaging the finish. The faucet handle may need to be removed to change the filter or to identify the cause of a leak. Sometimes, the faucet may need to be replaced. How exactly you can do this? We’ve done our research, and we’re sharing our findings in today’s post. How to remove faucet handle in the best way is described below.

How to Remove Faucet Handle that Got Stuck ( With Screw)

Before removing the faucet handles, make sure you have the following materials in hand to speed up the process.


Materials Required

Slot Screwdiver
Faucet puller
Spray lubricant
Scrap wood

Steps on How to Remove Faucet Handle that Got Stuck

How to remove faucet handle

Step 1: Remove the Screw

You need a slot screwdriver to remove the faucet cap, and a Phillips screwdriver to remove the screw from handle. As soon as the screwdriver head starts to strip, push down firmly to keep the handle retaining screw engaged. Using a drill and a screw extractor will help you to remove the stripped head.

The best way to turn a screw is to lubricate it properly, wait for a few minutes, and then turn it again. If necessary, spray more lubricant on it.

Step 2: Pull the Handle

Pull the handle straight up and off the stem of the valve. Wrap a rag around the valve handle and tap it lightly with a hammer if it’s stuck to the stem. Be careful not to dent or break the handle by using too much force with a hammer. If the handle won’t come off, try spraying a few drops of lubricant between the handle and the stem of the valve.

Pull the handle after a few minutes of letting it sit.

Step 3: Wedge the tip

Attach a scrap piece of wood to the body of the faucet. Use a slot screwdriver to wedge the tip under the handle. Pry up on the handle with the wood for support. Prying up on the handle will likely loosen the handle if you use the wood as a fulcrum.

Step 4: Use Faucet Puller

If you are unable to pull the faucet, then purchase a faucet puller. The central shaft of the puller is inserted into the central screw hole of the handle, and then its arms are hooked under the base. The puller pulls the handle off the faucet stem when you turn the handle clockwise, just as the corkscrew takes off the cork on a bottle.


Also Read : How to remove chemical stains from sinks

  How to install undermount sink to quartz

How to fix Clogged Kitchen Sink

How to Remove Faucet Handle Without Screws

Some faucet handles come without screws . You may find the task of removing the screw-less faucet handle a little complex at first glance. If you are having trouble removing the screw-less handle of the faucet, read on for the basic steps to remove it quickly.

Most screw-less faucet handles are removed the same way, though if you aren’t sure how to remove the screw-less faucet handle, you should consult the user’s manual. In case you cannot find the manual, it is also available online.

Materials Required

Clean cloth
A handle puller
Flat-head Screwdriver
White vinegar
Allen wrench

Methods on How to Remove Faucet Handle Without Screws

Step 1: Turn Off the Valve

Place all of your tools on the vanity or the side of the sink. Make sure that both the faucet and the faucet’s hose are completely turned off. There are often a button or a cap attached to screw-less faucet handles, usually on the top or side of the faucet.

Step 2: Remove the Cap

After finding the cap, carefully insert a flathead screwdriver into the empty gap between the two halves. The cap will pop right out if you work it gently around the edge. Ensure that the cap doesn’t fall into the sink by placing it on a table. Remove the cap with care since they are prone to cracking rather easily.

Step 3: Find the Valve

If you are going to remove any other components, remember to cut off the water supply line before you start dismantling the faucet. You will need to find the valve under the sink and turn the lever to the right following the instruction that is on the valve.

Make sure you turn the lever until it cannot be turned anymore. If you do not know where the switch is located, you can also turn off the water supply to the building by turning off the main switch in the basement.

Next, if any remaining water remains in the faucet handles, open them again and let it flow so that any trapped water pressure can be released.

Step 4: Remove the Set Screw

The invisible set screw under the cap should be visible once the cap is taken off. Remove the invisible set screw by using your screwdriver. Prepare the sink with a rag or paper towel before you begin this step so the screw does not fall down the drain. Losing the screw will prevent you from reattaching the faucet handle. Next, you will need to use an Allen wrench or a spanner in order to complete the process.

Step 5: Take Out the Faucet

As soon as you have untwisted the set screw, take a small rag or towel and wrap it around the handle, which will prevent you from scratching it while removing it. You will now be able to gently take the faucet handle out of its current position. As far as removing the handle is concerned, it’s best to use a faucet handle puller or a pair of pliers in order to move it through the process, since you’ll need a firm grip in order to get it out.

Step 6: Apply White Vinegar

If all goes well, once you’ve removed the handle, take your clean cleaning cloth and apply the white vinegar or metal cleaner to the surface of the faucet to remove any debris, hard water stains, or grime that could have accumulated around the edges. As you are checking the faucets, you will also want to make sure there are no cracks in the cartridge that could lead to leaks in the future.

Also Read: How to Clean a Copper Sink Fast

How to vent a Kitchen Sink Under Window

How to tighten Kitchen Faucet at Home

How to Remove Faucet handles of Two Faucets Without Removing the Screws?

You are advised to turn off the water under the sink before attempting this method in order to keep yourself and others safe. The handle arm of the faucet should be held in place while you rotate the faucet’s base counterclockwise.

Remove the screw inside the faucet’s base after removing the base of the faucet. Utilizing a screwdriver, remove the underneath centerpiece.

After the screw is removed, you will discover a white cartridge under the centerpiece. Replace the current cartridge with a new one by using needle-nose pliers. There have been many complaints about using pliers to remove cartridges.

Buying a new bathroom sink faucet from a reputable brand such as Delta will enable you to avoid such issues. In order to prevent such problems and to assure a high level of customer support, these brands provide comprehensive support, including replacement parts and tools when needed.

How to Remove Sink Lever-Style Faucet Handle

A cold and hot button is located on the front side of the faucet handle. Using a flathead screwdriver, press firmly on the border of each button with the tip of the screwdriver.

It is very important that you take extra care when you remove or handle the buttons since they are pretty fragile. Their size makes it possible for the buttons to be easily washed away when the drain is running. Before transferring the pieces, I advise you to cover the drain to prevent them from falling into the drain. The screw is not found when you remove the button; instead, an Allen Key is present.

Therefore, in order to remove the Allen key, you will need an Allen wrench. Once you have removed the Allen key, the handle of the bathroom sink faucet needs to be lifted in order to be removed. However, some bathroom sink faucets have cartridges attached to them.

For those who have such a cartridge, you will need to remove the top piece which screws onto the cartridge to expose the cartridge’s top. But if the sink faucet does not have a cartridge, removing the Allen key will reveal the actual faucet, through which the water is delivered.

When you remove the Allen key from the sink faucet, you will find a gold-colored piece if the faucet has a cartridge. It can be removed by screwing it and pulling it out with your hands.

It is recommended that you use an old towel to tie around it and then use a wrench to remove it if that is difficult. As long as the towel is on the gold-colored piece, it will prevent the wrench from scratching or damaging it in any way.

There is really no reason to take your old cartridge apart and try to replace the tiny pieces yourself if you could afford a new one instead of replacing your old one with a new one.

If you take the cartridge apart, it does not function well. Even if it does function, it will only last a short time. In order to fix this problem, the only thing you can do is to replace the whole thing.

Final Thoughts

It’s pretty easy to remove a loose faucet handle. When using pliers to grip the handle, be careful not to damage it.

There are lots of styles and designs of bathroom faucet handles. Besides holding the faucet in place and letting water flow, they look good.

Smooth faucet handles add a touch of elegance to the sink and room, making it more pleasing to the eye. Since these handles are very versatile,, each one can be removed with a different method, as discussed in this article, as the process differs depending on the handle.

You should be aware of the kind of handle you will be dealing with before you begin to remove the faucet handle. Then define a plan and follow it. Once you have determined the proper way to remove the faucet handle, proceed to the next step.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top