Step by Step Guide: How to Install an Outside Faucet With Pex ( 5 Quick Steps)

I Know why you are came to read this post ?

It’s nothing, but you don’t know how to install an outside faucet with PEX piping.

How to install an outside faucet with PEX piping

If I am right, then you don’t have to feel about it! I will help you to install that outside faucet along with PEX through my step by step process.

Many people will feel difficult it they don’t have an outdoor faucet in their home. Because it will help them a lot for example, if you have a garden in your backyard, you need water for your plants.

In that time your outside faucet will help you to finish this job.

So this simple DIY Project will help you to install an outdoor faucet with PEX piping. You won’t have to spend lots of money in this project.

You can finish it yourself with some tools and a little bit knowledge.

So, without wasting your precious time, let us see how to start it.

Things to do before installing an outdoor faucet

Things to do before installing outside faucet with PEX

There are certain things you want to do before placing an outdoor faucet in your home. this is also known as Pre-planning.

  • First of all, you should confirm the location where you want to install the outdoor faucet.
  • If you asked me, I will suggest you to choose a place, that is near to your plumbing area within your home.
  • Why I told that means, It will help to make an easy connection once you have installed your outdoor faucet.
  • Try to check the basement area to locate the water pipe running closer to your outdoor faucet.
  • As soon as you choose the correct location for installing your outdoor faucet and the nearby pipes to make the connection, you are ready to start the main job.

Materials Required

These are the list of tools and materials you will need to finish this job.

  • Threaded tee
  • Soldering iron and solder wire
  • Cleaning brush
  • Rag
  • PEX fittings
  • Nailing plates
  • Frost-free Sillcock faucet
  • Drill
  • PEX cutting tool
  • Silicone sealant
  • PEX piping
  • PEX clamp
  • Galvanized screws
  • Copper cutter

Also read: Fix leaking Outside Faucet

Step by Step: How to Install an Outside Faucet With PEX Piping

How to install an outside faucet with PEX piping

Here are the steps that you should follow to install an outside faucet with PEX piping.

Step 1: Shut off the Water Supply

  • First and foremost step, you should do is to shut off the water supply.
  • You may either switch off the water supply to the specific pipe where you will be working or turn off the main water valve to your residence.
  • Remember that it will block the water supply to your whole house, until it is turned on.
  • Let’s go to the next step.

Step 2: Drill to Mount the Faucet

  • To install the outside faucet, start by drilling a hole in the basement wall at the spot where you want it to be.
  • The hole has to be 1 inch in diameter in order for the sillcock faucet to fit through it properly.
  • Insert the sillcock faucet into the opening on the outer wall.
  • After inserting, take some galvanized screws to secure it to the wall on both sides.
  • Inspect the faucet to ensure that it is oriented downward toward the interior of the home.
  • This added approach will help to protect the water from freezing in the wintertime.
  • Tip: A silicone sealant should be used to secure the connection.

Step 3:Connect PEX Adapter

  • Make your way to the interior of the home to locate the other end of the sillcock faucet that you just completed installation of.
  • Then, using a copper cutter, trim the water pipe from where you’d like to make the connection.
  • Ensure a bucket is positioned beneath the sink since any water that accumulates in the pipelines may drain into it without causing a mess on the floor.
  • Now, you have to mount the threaded tee at the place, where you have created the cut and connect the pex adapter to the free end of the threaded tee.
  • Weld all of the new joints to the water pipe together using a soldering iron to keep them in place.
  • Remove any remaining remnants with a cloth.

Step 4: Connect the PEX Adapter

  • Retrace your steps back towards the end of the sillcock faucet that is located inside the home.
  • Wash the end from the inside to ensure that nothing is obstructing the water’s flow route to the outside.
  • This would be completed with the help of a cleaning brush.
  • The PEX adapter should be oiled. once you have oiled the adapter, mount it to one end of a new water cutoff valve.
  • After that, you must connect the cutoff valve to the tip of the faucet, with a copper fitting somewhere between, to complete the installation.
  • Before connecting the pieces, lubricate all of the ends.
  • All of the new connections should be secured in place with the help of a soldering iron as well as some soldering wire.
  • Remove any solder dust from the connections by wiping them with a cloth.
  • Now, leave the connection to rest before fitting the PEX pipe.
  • This is due to the fact that it is made of plastic and may melt.

Step 5: Install the PEX Pipe

  • Attach your PEX pipe into the free end of the connection you created between the water pipe within the home .
  • Now, you have to position it in a PEX clamp and twist it to ensure that the connection is secure.
  • Extend the PEX pipe above the ceiling of your basement.
  • You should also fasten it with 1-inch PEX clips at appropriate intervals throughout the length of the PEX pipe.
  • Take the PEX pipe all the way around to the inside of the faucet, attaching it at the top all the way down the length.
  • Trim the PEX pipe using a PEX cutter at the place where you want to establish a connection to the faucet.
  • With the help of an expansion tool, attach it to a PEX adapter at the other extremity of the faucet.
  • Make use of a PEX clamp to secure the connection in the same manner as you performed at the other side.

Step 6: Turn on the Water

  • Now you have to check that your outdoor faucet is working or not.
  • For that, you have to turn on the water supply line to your home.
  • Open the Main water valve that supplies water to your whole home or just the water pipe you were working with.
  • Turn on the cutoff valve that you put on the inner end of the faucet as well.
  • Step outside and turn on the outside faucet.

That’s all, you have successfully completed this job.

Video Guide: How to install Frost-Proof Faucet with PEX Tubing

Video Guide: How to Connect Outside Water Faucet to PVC Pipe

 

Also read: Outdoor Faucet Won’t Turn Off

Best Outdoor faucet to buy

Conclusion

Look how easy it was. You’ll also have pleasure installing your own DIY outdoor faucet if you have your mind set on it!

Furthermore, you’ll be going to save a big money in installing the faucet. The actual process isn’t that difficult after you’ve learnt how to install an outdoor faucet using pex.

This will only take you about an hour to finish the whole thing, and the end product will be well worth your time!

You’ll have water right where you really need it, whether it’s for feeding your garden, cleaning your vehicle, or any other outdoor activity you have planned.

 

Related Questions

1. Why is PEX plumbing bad?

Compared to copper pipe and galvanized steel pipes, PEX pipes are more susceptible to damage as a result of their high permeability and flow rate.

For example, a rat may readily eat through them . Chemical Issues — Some varieties of PEX have been shown to leak hazardous chemicals and impurities into the environment, altering the taste and odor of drinking water.

2. Is PEX safe for drinking water ?

Due to worries about harmful compounds escaping through the pipe and into the water supply, PEX was prohibited in California. A variety of national laboratory examinations have shown that PEX is entirely safe and long-term in nature. It is currently permitted in California, and it is even listed in the state’s primary plumbing rules.

3. How long will PEX last?

PEX has also been subjected to extensive long-term testing, which has shown that it has a possible lifetime of more than one hundred years.

4. Where is PEX not allowed?

PEX cannot be put in high-temperature environments. It is not possible to install PEX in high-heat places, such as near recessed lights. This also implies that you can’t connect PEX straight to a hot water heater, but you may do it with the use of a connecting element instead.

5. Should I use PEX or copper?

In our opinion, PEX Tubing is superior to copper tubing in the vast majority, but not all, of plumbing transition fitting. It also cost less than 100 dollars to finish the job.

6. Do PEX pipes burst when frozen?

Even though PEX freezes, it pops, very much like copper and CPVC, and this is a known fact. There is no material that can withstand the amazing power and pressure that is associated in freezing. The only trusted method of preventing a frozen tubing from exploding is to protect the pipe or cold water line from freezing in the first spot, as previously stated.